« previous next »
Pages: [1]

Author Topic: artix7 SoM CPLD  (Read 895 times)

bastionbooger

  • Active Member
  • *
  • Posts: 9
artix7 SoM CPLD
« on: February 17, 2021, 05:17:05 PM »
1) is it possible to pull the EN1 signal to ground on the CPLD and switch off the SoM buck converter (FPGA 1.0V) in software? Using the board as is, with only CPLD bitstream changes.

2) is the source code for the CPLD firmware available?
Logged

JH

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1997
Re: artix7 SoM CPLD
« Reply #1 on: February 18, 2021, 01:25:15 PM »
Which artix 7 module did you mean?
we have several products with artix:
https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Artix-7/
br
John
Logged

bastionbooger

  • Active Member
  • *
  • Posts: 9
Re: artix7 SoM CPLD
« Reply #2 on: February 18, 2021, 02:03:06 PM »
yes, sorry: it is the te0712 a200t

i see that the te0711 has a dedicated pwr_dis output on the CPLD. not all artix7 SoMs are alike in this matter.

But still it should be feasible to repurpose EN1 on the te0712 for this purpose, even though it is supposed to be just a CPLD input.
Logged

JH

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1997
Re: artix7 SoM CPLD
« Reply #3 on: February 18, 2021, 02:49:42 PM »
Hi,
please need a email to support@trenz-electronic.de

br
John
Logged
Pages: [1]
« previous next »