News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

XMOD Unknow device issue TE0841-02Som,TEBA0841-02 and XMOD TE0790-03

Started by srg, August 21, 2020, 07:25:42 AM

Previous topic - Next topic

srg

Hello,

In my setup FPGA is not detecting in JTAG.

I have following Hardware setup.
TE0841-02 SoM
TEBA0841-02 Daughter board. 3.3V Power is supplied through J3 5(3.3.v)-6(GND),  VCCIOA is set to 3.3V
TE0790-03 XMOD

all other setting are default.
When is try to connect device in Vivado hardware manager Digilent JTAG is detecting but Unknown device is showing.
Please me know what could be the issue.

Thank You.

JH

Hello,
you see the CPLD from the XMOD or from the TE0841 module,

please check DIPs on the Carrier(TEBA0841):
https://wiki.trenz-electronic.de/display/PD/TEBA0841+TRM#TEBA0841TRM-DIP-Switch
-->S1-1 should be off for FPGA Access

DIP on the XMOD :
https://wiki.trenz-electronic.de/display/PD/TEBA0841+TRM#TEBA0841TRM-JTAGInterface
-->S1-1 should be ON, all other OFF

Is some of this DIPs maybe wrong?


PS: Pay attention with the other variable bank voltages, TE0841 has also HP Banks which supports max 1.8V:
https://wiki.trenz-electronic.de/display/PD/4+x+5+SoM+Integration+Guide
VCCIOA is HR, so your setup is OK.


br
John

srg

Able to detect FPGA after changing TEBA0841-02 DIP SW 1 position.

Thank You.