« on: May 30, 2011, 05:53:31 PM »
Q: what recommendations shall I follow for the hardware development of custom Eddy-CPU base boards?- connect all ground (GND) pins
- connect all supply voltage (Vcc / 3V3) pins
- connect FPG signal to
- high-level for normal operation
- low level for Flash programming
- pull up the PC16 (nRESET) signal to the supply voltage (Vcc / 3V3) through a 1 kohm resistor
« Last Edit: June 01, 2011, 11:16:40 AM by Hengist »
Logged
