News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

efuse encryption for TE0720 using TE0703 or TE0706

Started by vivanov, December 26, 2019, 10:27:59 PM

Previous topic - Next topic

vivanov

Hello,

TE0720 description has efuse encryption.
Vivado requires JTAG BOOT mode for efuse encryption, but only SD boot mode or QSPI boot mode are available with TE0703 or TE0706.
Enabling JTAG boot mode in Zynq FSBL does not help because Vivado still see SD boot mode or QSPI boot mode.
Please provide a method for efuse encryption for TE0720-03-1CF and TE0720-03-1CR modules.

Best Regard,

Vassili

JH

Hello,
which vivado version did you use? As I know it was working also with QSPI/SD mode on older versions.

I can send you CPLD Firmware version with JTAG boot mode if you want? Can you send a Email to support@trenz-electronic.de

Which carrier did you use? You can reprogram CPLD only with carrier which has JTAGEN pin selectable.
https://wiki.trenz-electronic.de/display/PD/TE0720+CPLD+Firmware

br
John

vivanov

Hello John,

I am primary use Vivado 2017.3.1, because newer versions of Vivado have bugs.
I have and tried both TE 0706 and TE0703 carrier board, but both did not work.

I send you email to support@trenz-electronic.de
Would you please send me CPLD Firmware version with JTAG boot mode for my modules?

Thank you,

Vassili