TEBF0808 second exfat SD card not detected

[joseer]

Hello,

I'm booting petalinux in one of the two available SD card slots of the TEBF0808 using a 16GB SD card (FAT32), I also can write/read data from the same card.
Now I'm trying to use the second SD card slot with a 128GB (EXFAT) card, but the problem is that after booting this last is not being detected:

Code Select Expand

root@petalinux:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
devtmpfs                484864         4    484860   0% /dev
tmpfs                  1023736       132   1023604   0% /run
tmpfs                  1023736        88   1023648   0% /var/volatile
/dev/mmcblk1          15541760    710840  14830920   5% /run/media/mmcblk1
/dev/mmcblk1          15541760    710840  14830920   5% /media

The sd card works fine in a windows machine...

Any idea what I'm missing?

Thanks in advance.

[JH]

Hi,
you try to use both SD card slots together? They are multiplexed, so you can't use both together:
https://wiki.trenz-electronic.de/display/PD/TEBF0808+CPLD#TEBF0808CPLD-SD

And it can also happens that you must check petalinux configuration --> it can happens that EXFAT is not enabled/supported by default.
And I'm not sure if BootROM of the ZynqMP support EXFAT. In this case you must use a smaller partition with FAT for boot image and a second partition for other things. Use for the second partition EXT4 --> it's more native for linux :-)

br
John

[joseer]

Hi John,

Thanks for your answer, and info  I missed they were multiplexed.

I'll try then to use different partition one for boot (FAT32) and the other for data (EXT4) on same SD card.