TE0714: mgt_clk1 missing in board file

[tecnolr]

Hello,
I'm playing with boards TE012 and TE0714, trying to set up an Aurora channel between them. I'd like to use the 125 MHz clock available on both boards (mgt_clk0 on TE0712, mgt_clk1 on TE0714), but I don't see mgt_clk1 listed in the board resources of TE014. On the contrary, mgt_clk0 is available in the resources of TE012. I can fix it by hand, but I wonder why the missing in TE014. Is it because the 125 MHz oscillator is not available by default on that board, but only upon specific request/buy, or what?
Thanks for answering.
 

[JH]

Hi,
not all IOs are included into the board part flow at the moment. We will update this in on of the next design updates.

Use Xilinx floorplanner with IO planner to set constrains after syntheses.
You find the loc in the schematics (page 5):

• https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/3x4/TE0714/REV02/Documents

MGTCLK1 with 125MHz is B6/B5

For B2B also is also our excel pinout viewer possible

• https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/Pinout

br
John