Author Topic: Example of EEPROM writing on TE03xx Series modules  (Read 5170 times)

Thorsten Trenz

  • Administrator
  • Full Member
  • *****
  • Posts: 151
    • Trenz Electronic GmbH
Example of EEPROM writing on TE03xx Series modules
« on: December 23, 2010, 09:15:45 AM »
Q: I need an example of how to write EEPROM or Flash via the API

Please refer to the FX2_instruction_set.xls in the reference design for the full command set.
A description can be found here: http://docs.trenz-electronic.de/Optomotive/intellectual%20property/CAM_API_user_guide_v10.pdf

Code: [Select]
char SetDeviceIDcommand(unsigned int handle, unsigned char device_id)
{
      byte cmd[FX2_MESS_LEN], reply[FX2_MESS_LEN];
      int cmd_length = 64;
      int reply_length = 64;

      cmd[0] = 0xA9;
      cmd[1] = (byte)(DEVICE_ID_EEPROM_ADDR>>; //addr HIGH
      cmd[2] = (byte)DEVICE_ID_EEPROM_ADDR; //addr LOW
      cmd[3] = 1; //single byte
      cmd[4] = device_id;

      if (TE0300_SendCommand(handle, cmd, cmd_length, reply,&reply_length,TIMEOUT_MS)) {
            MSG(::MessageBox(NULL,"GetDeviceIDcommand!","ERROR",MB_OK)
            return -1;
      }
      return 0;
}